Steel industrial gates
Classic steel gates, that can be found in almost all production facilities and storage halls. Compared to competing types, they excel with sophisticated production. The output is a product with reduced economic difficulty while damaged. The gates are supplied with hinges of their own production with a minimum friction surface and a high load on the hinge. These hinges ensure easy handling without the need of greater opening force.
Warranty period: 60 months subject to compliance with the conditions for carrying out regular service inspections according to Decree 246/2001 Coll. as amended.
Surface finish:
Burned powder colour to RAL sampler.
Assembly variants:
single wing, double-wing, with the inserted door wing
Technical nomenclature
Method of stowing a threshold connector
Gates with door wing inserted
This system is used in places, where there is only one escape or emergency route and the area of the door exceeds 4m2. The door wing meets the minimum passage of 800 x 1970 mm. The gates are supplied with hinges of their own production with a minimum friction surface and a high load on the hinge. These hinges ensure easy handling without the need of greater opening force.
Warranty period: 60 months subject to compliance with the conditions for carrying out regular service inspections according to Decree 246/2001 Coll. as amended.
Surface finish:
Burned powder colour to RAL sampler.
Assembly variants:
single wing, double-wing, with the inserted door wing
Technical nomenclature
Method of stowing a threshold connector
Insulated steel doors
We offer a non-fire product made of 2mm thick steel profile with sealing and insulating of door wings. It can also be delivered in a glazed version with a single glass or with an insulating double glass. The locking is only possible from the inside, in a jaw of a wing there are pins against the breakout or disengagement of the wing. The shutter can be supplied up to 6000 x 6000 mm. The door wings are filled with an insulation wool and the inner space can be filled with a mounting foam.
Warranty period: 60 months subject to compliance with the conditions for carrying out regular service inspections according to Decree 246/2001 Coll. as amended.
Surface finish:
Burned powder colour to RAL sampler.
Assembly variants:
single wing, double-wing, with the inserted door wing
Technical nomenclature
Method of stowing a threshold connector
Folding steel gates
We use a proven 50 x 50 mm closed profile for these gates. The outer double wing is always provided with hinges at the side of the door frame that are visible from the opening side. The hinges on the non-side view form an opening of the free wing by 90° The free wing is guided in the upper profile by drive rollers with bearings, which is anchored on the facade of the building. The door wings locking is done by lever locks and a lock with security fittings. The door wings can be equipped with pins against the disengagement or force opening.
Warranty period: 60 months subject to compliance with the conditions for carrying out regular service inspections according to Decree 246/2001 Coll. as amended.
Version with sealing on the frame and wing.
Folding gates are also delivered in a version with sealed profile.
Fillings:
The cassette can also be filled with any glazed part such as safety glass.
Surface finish:
Burned powder colour to RAL sampler.
Technical nomenclature
Method of stowing a threshold connector